JMC 13M Articulating Boom Aerial Lift Truck
JMC 13m Articulated Boom Aerial Work Platform Truck
The JMC 13m articulated boom aerial work platform truck is designed for urban maintenance, street lighting service, telecommunications installation, power inspection, and municipal work applications. Built on the JMC JX1043TCF26 4×2 light-duty chassis, it combines a compact vehicle structure with a flexible hydraulic boom system for efficient aerial operations.
Flexible 13m Articulated Boom System
Equipped with the GKS13 three-section articulated boom platform, the vehicle provides a maximum working height of 13 meters, a platform height of 11.3 meters, and a horizontal outreach of 6.2 meters. The folding boom design improves access around buildings, utility poles, and narrow urban areas where straight boom equipment may have limited operation space.
Stable Hydraulic Outrigger Support
The aerial platform adopts front and rear H-type hydraulic outriggers with independent telescopic structures. The 3,450 mm horizontal span and 3,720 mm longitudinal span provide stable support during elevated operations, while the boom-outrigger interlock system prevents lifting operation before full stabilization.
Reliable Hydraulic Control System
The hydraulic system uses a CB-G532 gear pump with a working pressure of 20 MPa and a flow rate of 32 L/min. Dual control stations, hydraulic counterbalance valves, emergency manual pump, and hydraulic locking devices provide accurate operation and additional safety during aerial work.
Compact JMC Light-Duty Chassis
Based on the JMC JX1043TCF26 chassis, the vehicle features a 3,360 mm wheelbase and 4,495 kg gross vehicle weight. The JX493ZLQ3A Euro III mechanical diesel engine delivers 75 kW (102 hp), providing simple maintenance and good fuel adaptability for overseas operating environments.
Practical Operator Platform Design
The work platform supports two operators with tools and features a 1,200 × 700 × 1,100 mm anti-slip structure. Ground and platform control stations allow flexible operation, while safety systems including overload protection, boom limit protection, and emergency lowering functions improve working reliability.
Aerial Work Device Specifications
| Specification | Description |
|---|---|
| Aerial Device Type | GKS13 three-section articulated folding boom aerial work platform designed for urban maintenance, street lighting repair, power line inspection, telecommunications installation, municipal works, and building maintenance applications. |
| Boom Configuration & Material | Three-section articulated folding boom manufactured from Q345B high-strength low-alloy steel. Reinforced welded boom structure with hydraulic folding and lifting cylinders provides stable operation, accurate positioning, and reliable service life. |
| Working Height | Maximum working height: 13.0 m (including operator height); maximum platform height: 11.3 m; working height at maximum outreach: ≥7.8 m. |
| Horizontal / Side Reach | Maximum horizontal outreach: 6.2 m; outreach at maximum height: ≥2.5 m; suitable for overhead maintenance and access operations in restricted working areas. |
| Platform Dimensions | 1,200 × 700 × 1,100 mm steel anti-slip work platform with protective guardrail structure; designed for two operators with tools. |
| Rated Platform Capacity | 200 kg rated load capacity, suitable for two operators and maintenance tools. |
| Platform Rotation | 360° continuous hydraulic rotation through slewing system; platform equipped with manual fine leveling adjustment for improved operator positioning accuracy. |
| Insulation / Live-line Capability | Standard non-insulated configuration; insulated work platform option available for electrical maintenance and live-line operation applications. |
| Outrigger / Stabilization System | Front and rear H-type hydraulic telescopic outriggers with independent or synchronized operation. Horizontal span: 3,450 mm; longitudinal span: 3,720 mm. Equipped with hydraulic locking system, boom-outrigger interlock protection, and anti-slip support pads for stable operation on different surfaces. |
| Hydraulic & Control System / Pressure | Hydraulic system equipped with CB-G532 hydraulic gear pump, 32 L/min flow rate, 20 MPa working pressure, ZMFB-12V electro-hydraulic multi-way valve, BM5-100 orbital hydraulic slewing motor, counterbalance valves, and dual ground/platform control system with safety interlock. |
Chassis Parameters
| Item | Details |
|---|---|
| Chassis Brand / Model | JMC JX1043TCF26 light-duty truck chassis |
| Drive Type | 4×2 rear-wheel drive |
| Engine Model / Power | JX493ZLQ3A inline 4-cylinder turbocharged diesel engine, 2.771 L displacement, mechanical high-pressure fuel injection system, rated power 75 kW (102 hp) at 3,600 rpm, maximum torque 240 N·m. |
| Emission Standard | EURO III |
| Transmission / Gears | Jiangchi JC528T6 manual transmission, 5 forward gears and 1 reverse gear; equipped with HWP-J528-Q side-mounted PTO interface for hydraulic pump drive. |
| Wheelbase | 3,360 mm |
| Track Width (Front / Rear) | Front: 1,400 mm; Rear: 1,425 mm |
| Gross Vehicle Weight (GVW) | 4,495 kg |
| Curb Weight | Approx. 4,150 kg |
| Tire Specification | 7.00R16LT steel radial tires with heavy-duty leaf spring suspension system. |
| Cabin Configuration | JMC double-row cab with 5-person seating capacity, factory heating and cooling air conditioning, hydraulic power steering, electric wipers, export-standard electrical system, and optional right-hand-drive configuration. |