HOWO Hohan 4×2 35 m Telescopic Boom Aerial Work Platform Truck
HOWO Hohan 4×2 35 m Telescopic Boom Aerial Work Platform Truck – GKS35
The HOWO Hohan GKS35 is a 4×2 truck-mounted aerial work platform with a seven-section telescopic boom, independent jib and 200 kg rated working platform. With a stated maximum platform height of 35 m and working radius of 21 m, it is designed for elevated maintenance, building exterior work, utility repairs, streetlight servicing and other operations requiring extended vertical and horizontal reach.
Seven-Section Telescopic Boom and Independent Jib
The main boom uses a seven-section octagonal box structure made from Baosteel BS960 high-strength steel, with an independent jib mounted at the boom tip. A hydraulic cylinder and wire-rope pulley arrangement controls telescopic movement, while the jib has a specified luffing range of 0–130°. The main boom operates from -2° to +75°, with polymer and copper self-lubricating wear pads supporting movement between telescopic sections.
35 m Platform Height and 21 m Working Radius
The GKS35 has a stated maximum platform height of 35 m and a maximum working radius of 21 m at a rated platform load of 200 kg. At the maximum radius, the supplied specification lists an approximate working height of 14 m. These reach figures should be checked against the manufacturer's approved working range diagram and load chart before being used as guaranteed operating limits.
Four Hydraulic Outriggers and Stability Interlocks
The vehicle uses four independently controlled hydraulic outriggers, with two-section V-type front outriggers and H-type rear outriggers. The maximum specified lateral and longitudinal spreads are 4,200 mm and 4,050 mm respectively. Ground-contact and support-pressure monitoring provide alarms and restrict boom movement when the required stabilization conditions have not been achieved.
360° Slewing and Rotating Operator Cab
A hydraulic worm-gear drive with planetary reduction allows continuous 360° turret rotation at a specified adjustable speed of 0.8–1.2 rpm. A six-channel rotary joint transfers hydraulic circuits and electrical signals between the chassis and rotating structure. The enclosed upper operating cab rotates with the turret and provides a separate control position for elevated work.
200 kg Aluminum Working Platform
The working platform measures 1,600 × 700 × 1,000 mm and is constructed from 6061-T6 aluminum alloy with an anti-slip floor. Its rated capacity is 200 kg for up to two workers and their tools. Automatic hydraulic leveling maintains the platform's horizontal position during boom movement, while standard hydraulic rotation is ±180°, with 360° rotation available as an option.
Proportional Controls and Multi-Station Operation
The platform uses a proportional joystick and foot switch to control boom luffing, telescopic movement, turret slewing, jib movement and platform rotation. Three control stations are provided: the upper operating cab, working platform and ground station. The system includes control-priority interlocks, emergency stop switches and a monitoring display showing boom position, working radius, load percentage, outrigger pressure, hydraulic oil temperature and fault information.
PTO-Driven Hydraulic System and Emergency Recovery
The hydraulic system receives power from a transmission-mounted PTO and uses dual gear pumps with specified displacements of 40 mL/rev and 25 mL/rev. The rated system pressure is 16 MPa, with a stated relief pressure of 18 MPa, and a 100 L hydraulic oil tank supplies the operating circuits. An independent 24 V DC electric hydraulic pump provides emergency power for specified recovery operations, including boom retraction and platform lowering if the main hydraulic power source fails.
HOWO Hohan Chassis and Yuchai Diesel Engine
The GKS35 is mounted on the SINOTRUK HOWO Hohan ZZ1047D3414D145 4×2 chassis, with a 3,360 mm wheelbase and a single-row cab. Its Yuchai YC4E140-33 turbocharged and intercooled diesel engine delivers 103 kW (140 hp) and 430 N·m of torque, paired with a WLY6T100 six-speed manual transmission. The specified chassis configuration includes a double-layer frame, power steering and air braking system.
Safety Monitoring and Optional Equipment
The listed protection features include an electronic load moment limiter, boom position sensors, outrigger support monitoring, vehicle tilt alarm, hydraulic counterbalance valves and three emergency stop switches. Optional equipment includes a wind-speed meter with alarm and lockout, platform weighing system, hydraulic oil cooler, wireless remote control, generator, boom-mounted LED lights and centralized lubrication. The stated 35 m platform height, 21 m working radius and 200 kg load combination must be verified against the manufacturer's approved load chart and final vehicle configuration.
Aerial Work Device Specifications
| Specification | Description |
|---|---|
| Aerial Device Type | Seven-section telescopic straight boom with independent jib |
| Boom Configuration & Material | Seven-section octagonal telescopic boom with independent jib, made of Baosteel BS960 high-strength quenched-and-tempered steel |
| Working Height | Maximum platform height: 35 m (manufacturer-specified; measurement reference requires confirmation) |
| Horizontal / Side Reach | Maximum working radius: 21 m at 200 kg platform load; working height at maximum radius: approximately 14 m; horizontal radius at maximum platform height: approximately 4.5 m |
| Platform Dimensions | 1,600 × 700 × 1,000 mm, 6061-T6 aluminum alloy structure with anti-slip aluminum floor |
| Rated Platform Capacity | 200 kg, rated for 2 persons plus tools |
| Platform Rotation | Standard ±180° hydraulic rotation; optional 360° rotation; automatic hydraulic leveling |
| Insulation / Live-line Capability | Not specified; no standard insulation rating provided |
| Outrigger / Stabilization System | Four independently controlled hydraulic outriggers; front two-section V-type and rear two-section H-type; maximum lateral spread: 4,200 mm; maximum longitudinal spread: 4,050 mm; 520 mm vertical jack stroke; double-acting hydraulic locking valves |
| Hydraulic & Control System / Pressure | Dual gear pumps: 40 mL/rev main pump and 25 mL/rev auxiliary pump; rated system pressure: 16 MPa; relief pressure: 18 MPa; electro-hydraulic proportional control; PLC and CAN-bus communication; 24 V DC emergency electric pump |
Chassis Parameters
| Item | Details |
|---|---|
| Chassis Brand / Model | SINOTRUK HOWO Hohan ZZ1047D3414D145 |
| Drive Type | 4×2, rear-wheel drive |
| Engine Model / Power | Yuchai YC4E140-33, 4.257 L turbocharged and intercooled diesel, 103 kW (140 hp) |
| Emission Standard | Euro III |
| Transmission / Gears | WLY6T100, 6-speed manual transmission |
| Wheelbase | 3,360 mm |
| Track Width (Front / Rear) | Front: 1,605 mm; Rear: 1,520 mm |
| Gross Vehicle Weight (GVW) | 4,495 kg |
| Curb Weight | 4,200 kg |
| Tire Specification | 7.00R16 radial tires |
| Cabin Configuration | HOWO Hohan 1880 mm single-row cab, left-hand drive, 2–3 seats, hydraulic tilting, power steering, heating and air conditioning |




