Isuzu NKR 600P 7m³ Garbage Compactor Truck
Isuzu 600P 4×2 7 m³ Rear Loader Garbage Compactor Truck
The Isuzu 600P 4×2 rear loader garbage compactor truck is designed for municipal refuse collection, residential waste transfer, commercial waste handling, and urban sanitation operations. Built on the Isuzu NKR600P Euro III chassis, it combines a 7 m³ enclosed compactor body with hydraulic loading, refuse compression, and controlled discharge functions.
7 m³ Rear-Loading Compactor Body
The compactor body provides a nominal capacity of 7 m³ and uses high-strength steel in the main structure, with reinforced wear-resistant steel in the floor and hopper areas. The welded body and corrosion-resistant coating provide suitable durability for repeated municipal waste collection and transfer operations.
Efficient Slide-and-Scraper Compaction
The sliding plate and scraper plate work in sequence to collect, compress, and transfer refuse into the main body. Polymer wear blocks and reinforced guide rails help maintain smooth plate movement, while the dual-bin lifter can handle two standard 240 L waste bins with a rated lifting capacity of up to 750 kg.
Sealed Loading and Leachate Collection
A full-perimeter EPDM sealing system helps contain liquid during waste loading and transportation. Dual leachate tanks with a combined capacity of approximately 200 liters collect liquid from the hopper and compactor body, reducing leakage and secondary road contamination during collection routes.
Integrated Hydraulic and Control System
The hydraulic system operates at a working pressure of 18 MPa with a flow rate of 50 L/min and uses a PTO-driven gear pump. Manual hydraulic controls, rear electric control boxes, and optional wireless remote operation provide flexible control, while hydraulic locks, counterbalance valves, and interlocks help prevent unsafe operating sequences.
Isuzu NKR600P Euro III Chassis
Powered by the Isuzu 4KH1-TC four-cylinder diesel engine, the chassis delivers 96 kW (130 HP) and 280 N·m of torque. The five-speed MSB-5M manual transmission, reinforced leaf-spring suspension, pneumatic-assisted braking configuration, and 7.00R16 all-steel radial tires provide a practical platform for urban sanitation work.
```html
Rear Loaders Parameters
| Item | Details |
|---|---|
| Volume | 7 m³ |
| Type | Rear loader compactor |
| Compaction ratio | Slide-and-scraper compaction system; typical compaction density: 0.6–0.8 t/m³ |
| Max Payload | Approx. 4.2–5.6 t compressed waste load; actual legal payload subject to completed vehicle curb weight and applicable GVW regulations |
| Hopper | Hopper capacity: 0.85 m³; Hydraulic rear loading hopper with lifting and compression feeder mechanism |
| Tailgate | Hydraulic locking rear hopper with full-perimeter EPDM sealing, rear discharge opening seal, and hydraulic push-plate forced discharge |
| Material & Thicknesses | Q345 high-strength low-alloy steel / Q235 structural steel / wear-resistant steel; Body side panels: 4 mm; Body floor: 5 mm; Hopper floor: 6 mm; Body roof: 3 mm; Ejector plate: 5 mm |
| Bin type & compatibility | Dual-bin swing-arm lifter for standard 240 L refuse bins; Optional 660 L bin lifter and swing-arm loading device |
| Lift capacity | Maximum lifting load: 750 kg |
| Cycle time | Loading cycle: ≤10 s |
| Hydraulic pump flow / pressure | Hefei Changyuan CBQ-F550-AFHL gear pump; Flow: 50 L/min; System working pressure: 18 MPa; Pump rated pressure: 20 MPa |
| Control Systems | Manual hydraulic valve + rear electric controls + wireless remote control; Siemens S7-series PLC with automatic cycle control and interlocking |
| Safety and Auxiliary Features | Hydraulic locks, counterbalance valves, relief valve, three emergency stop buttons, hopper/PTO/compaction interlock, travel interlock, amber warning beacon, audible buzzer, rear work platform, safety handrails and reflective markings |
| Optional | 660 L bin lifter, swing-arm loading device, ground-pit docking loading system, cab-mounted control panel, rear-view camera with parking radar, 304 stainless steel leachate tank, hydraulic oil heating system, customized paint and safety markings |
Chassis Parameters
| Item | Details |
|---|---|
| Chassis Brand/Model | Isuzu NKR600P / QL1070HKHR1Y |
| Drive Type | 4×2 |
| Engine Model / Power | Isuzu 4KH1-TC, 96 kW (130 hp) |
| Emission Standard | Euro III |
| Gearbox / Gears | Isuzu MSB-5M, 5-speed manual |
| Wheelbase | 3,360 mm |
| Wheel Track (Front/Rear) | Front 1,504 mm / Rear 1,425 mm |
| GVW | 7,300 kg |
| Curb Weight | 5200 ~ 5540 kg |
| Tire Size | 7.00R16 14PR all-steel radial tires |
| Cab | Isuzu NKR600P single-row tilting all-metal cab, 2-person seating, 45° forward tilt, manual heating and air conditioning |
```