Hubei Huixin Truck Co., Ltd

Tow Truck

Foton Aumark S3 4-Ton Flatbed Tow Truck

Wheel-lifting Capacity: 2,000 kg
Deck Rated Laden: 3000 kg
Winch Rated Pull: 4,000 kg
Chassis Brand/Model: oton Aumark S3
Drive Type: 4 x 2
Engine Power: 110 kW(148 hp)
Deck size: 5600 x 2300 mm
The sliding flatbed and rear wheel-lift allow one vehicle to be loaded while another is partially towed, improving flexibility for roadside recovery work.
Description Spec Sheet
Description

Foton Aumark S3 4×2 Flatbed Tow Truck

The Foton Aumark S3 4×2 flatbed tow truck is designed for vehicle recovery, roadside assistance, accident clearance, and short-distance transportation of disabled vehicles. Its hydraulic sliding flatbed, recovery winch, and two-section wheel-lift system provide multiple recovery methods on a compact light-duty chassis.

Hydraulic Sliding and Tilt Flatbed

The recovery platform extends to 5,600 mm and provides a usable width of 2,300 mm with a rated capacity of 3,000 kg. Its hydraulic sliding and low-angle tilting structure helps reduce the loading approach angle, making it suitable for passenger cars and damaged vehicles with limited ground clearance.

4-ton Hydraulic Recovery Winch

A hydraulic worm-gear winch provides a rated pulling force of 40 kN with 25 meters of 11 mm galvanized steel wire rope. The self-locking reduction mechanism allows the winch to pull non-running vehicles onto the platform in controlled recovery operations.

Two-Section Rear Wheel-Lift

The telescopic rear wheel-lift has a rated lifting and towing capacity of 2,000 kg and an extended length of 1,800 mm. L-type wheel clamps, tow forks, fork sleeves, and auxiliary dollies allow the truck to perform partial-load towing when the disabled vehicle cannot be fully loaded onto the flatbed.

Reliable Hydraulic Recovery System

The hydraulic system operates at a rated working pressure of 16 MPa and uses a CB-FC40 gear pump, six-section manual valve assembly, and counterbalance valves. Hydraulic locking functions help control the flatbed and wheel-lift during pressure loss, while dual-side manual controls provide convenient operation around the recovery body.

Compact Foton Aumark S3 Chassis

Powered by a Cummins ISF2.8 Euro III diesel engine producing 110 kW (148 HP) and 360 N·m of torque, the Foton Aumark S3 chassis provides a 4×2 rear-wheel-drive platform with a 3,360 mm wheelbase and 4,495 kg GVW. The compact dimensions support maneuverability in urban recovery and roadside assistance work.

Spec Sheet

Flatbed Tow Truck Parameters

ItemDetails
Wheel-lifting Capacity2,000 kg; two-section telescopic rear wheel-lift for partial-load recovery and towing
Deck ModeRollback; hydraulic sliding and tilt flatbed with low-angle loading function
Deck Length (MAIN / AUX)4,200 mm / 1,400 mm hydraulic extension tailboard; 5,600 mm total extended length
Deck Width2,300 mm effective platform width
Deck Rated Laden3,000 kg; 4 mm high-strength anti-skid pattern steel plate, 3P2A folded and stamped structure, with No. 16 high-strength manganese-steel longitudinal members
Winch Rated Pull40 kN (4 ton); Guangdong Zhuoyi hydraulic worm-gear recovery winch with self-locking holding function
Wire Rope DiameterΦ11 mm galvanized steel wire rope
Wire Rope Length25 m
Operation ModeDual-side manual hydraulic control valve banks with protected operating handles
Optional DevicesImported hydraulic components including Rexroth hydraulic pump and Parker valve bank; wireless remote hydraulic control system; extended wheel-lift section; on-board hand-wash water tank; vehicle-mounted air compressor; basic vehicle recovery and forced-entry tool kit; upgraded anti-slip deck coating; additional LED work lights; rear-view camera and parking sensors

Chassis Parameters

ItemDetails
Chassis Brand/ModelFoton Aumark S3 BJ1049V9JD6-A3 Euro III export chassis
Drive Type4×2, rear-wheel drive
Engine ModelCummins ISF2.8 Series, 110 kW (148 hp) at 3,200 rpm, maximum torque 360 N·m at 1,800–2,700 rpm
Emission StandardEuro III; cooled EGR emission control without SCR or DPF after-treatment
GearboxWLY5G40 5-speed manual transmission; sandwich-type PTO with output power of at least 20 kW; 6-speed manual transmission optional
Wheelbase3,360 mm
Wheel Track (Front/Rear)1,730 / 1,590 mm
GVW (Gross Vehicle Weight)4,495 kg
Curb Weight3,550–3,750 kg
Tire Size7.00R16LT all-steel radial tires, 8PR; 6 tires including 1 spare tire
CabFoton Aumark S3 single-row wide forward-tilting cab, approximately 1,900 mm wide, 3-person capacity, mechanical suspension driver's seat, manual heating and air conditioning, manual windows, central door lock, mechanical instrument panel and radio

Send your message to us

Related Products