HOWO HW76 4×2 8-Ton Integrated Towing and Lifting Wrecker
HOWO HW76 4×2 Heavy-Duty Integrated Towing and Lifting Wrecker Truck
The HOWO HW76 4×2 integrated wrecker truck is configured for heavy-duty vehicle recovery, towing and roadside rescue operations. Its fixed-pivot superstructure combines an extendable lifting boom, telescopic wheel-lifting arm and two independent hydraulic winches. With a stated maximum towed vehicle mass of 13 tonnes and a 290 HP engine, this configuration is intended for recovering commercial vehicles without a rotating platform or flatbed.
Integrated 8-Ton Lifting Boom and Wheel-Lifting Arm
The main boom has a rated lifting capacity of 8,000 kg in its retracted configuration and 5,000 kg when fully extended. The three-section telescopic wheel-lifting arm is rated at 8,000 kg when retracted and 5,000 kg at maximum extension. Its extension stroke is 1,650 mm, while the boom provides a 1,150 mm extension stroke and a maximum hook lifting height of 4,800 mm. These ratings apply to different operating positions and must be assessed against the manufacturer's load chart and approved working conditions.
Dual 80 kN Hydraulic Winches
Two independent hydraulic winches provide a first-layer rated pulling force of 80 kN each, with a stated combined synchronized pulling force of 160 kN. Each winch uses a low-speed, high-torque hydraulic motor, two-stage planetary reduction and normally closed multi-disc wet brake. The standard configuration includes 20 m of 18 mm galvanized steel wire rope per winch, with independent overload protection and mechanical ratchet locks.
High-Strength Boom and Recovery Structure
The main boom, wheel-lifting arm, pivot seat and winch mounting base use GH70 high-strength steel, while other load-bearing structures use Q345B steel. The closed hexagonal boom incorporates internal wear-resistant nylon guide blocks, and the telescopic wheel-lifting arm uses mechanical locking pins to secure its sections during road travel. A reinforced double-layer auxiliary frame with a 260 mm beam height connects the recovery equipment to the chassis.
HOWO HW76 Chassis and 290 HP Diesel Engine
The truck uses a SINOTRUK HOWO HW76 flat-roof crew cab with one sleeper berth and four-point suspension. Its WD615.93E inline six-cylinder diesel engine has a displacement of 9.726 L and produces 213 kW (290 hp) with maximum torque of 1,160 N·m. The engine is paired with a HW19710 ten-speed manual transmission, while the rear-mounted full-power PTO supplies hydraulic power to the wrecker equipment. The specified chassis configuration includes an HF7 front axle, ST16 rear drive axle with differential lock and 11.00R20 heavy-duty tires.
25 MPa Hydraulic System and Dual-Side Controls
A PTO-driven high-pressure gear pump supplies the hydraulic system, with a continuous working pressure of 25 MPa and an instantaneous peak pressure of 28 MPa. The six-section main directional valve and two independent winch valve sections support separate or synchronized equipment operation. Control consoles on both sides of the truck provide access to the superstructure functions, while an independent manual emergency hydraulic pump allows the boom and wheel-lifting arm to be retracted if engine or PTO power is unavailable.
Hydraulic Load Holding and Mechanical Safety Locks
The hydraulic cylinders incorporate counterbalance valves to help prevent uncontrolled movement if hydraulic pressure is lost. Mechanical locking pins secure the telescopic wheel-lifting arm, while winch wet brakes and independent ratchet locks provide additional holding protection. Main and branch-circuit relief valves, boom travel stops and emergency stop buttons on both operating sides are included in the safety arrangement. Retractable rear auxiliary outriggers and wireless proportional remote control are available as optional equipment.
Recovery Accessories and Work Lighting
The standard accessory package includes U-type tire clamps, short and long towing forks, leaf-spring-specific towing forks, high-strength chains, shackles and an air-brake connection hose for disabled vehicles. The rear cargo compartment has separate storage doors on both sides, with an anti-slip checker-plate floor and securing rings for tools and recovery equipment. Three rear LED work lights illuminate the wheel-lifting and winch operating areas, while warning-yellow boom and arm surfaces improve visibility during recovery work.
Heavy-Duty Vehicle Recovery Applications
The integrated system is specified for a maximum continuously towed vehicle mass of 13,000 kg, with a stated GVW of 16,000 kg for the truck itself. Its fixed-pivot, non-rotating arrangement is designed for longitudinal recovery, lifting and towing of disabled commercial vehicles. The combination of two winches, telescopic wheel-lifting equipment and an 8-ton-class lifting boom makes it suitable for heavy truck breakdown assistance, accident recovery and fleet roadside support.
Integrated Tow Truck Parameters
| Item | Details |
|---|---|
| Towing Capacity | 13,000 kg maximum permitted towed vehicle mass |
| Hoisting Capacity | 8,000 kg (basic boom) |
| Wheel-lifting Capacity | 8,000 kg (arm retracted) / 5,000 kg (arm fully extended) |
| Wheel-lifting Length | 1,650 mm extension stroke |
| Max Hoisting Capacity (Fully Extended) | 5,000 kg |
| Boom Extension Length | 1,150 mm |
| Max Lifting Height | 4,800 mm (excluding hook and shackle) |
| Winch Rated Pull | 80 kN per winch (2 winches, 160 kN synchronized pulling force) |
| Wire Rope Diameter | 18 mm |
| Wire Rope Length | 20 m per winch |
| Operation Mode | Hydraulic manual controls on both sides; synchronized or individual winch operation |
| Outrigger Type | Optional retractable rear auxiliary outriggers |
| Optional Devices | Wireless proportional remote control, imported Parker or HAWE control valves, front removable counterweight, tropical hydraulic oil cooler, extended wire rope |
Chassis Parameters
| Item | Details |
|---|---|
| Chassis Brand/Model | SINOTRUK HOWO HW76 4×2 heavy-duty chassis |
| Drive Type | 4×2 |
| Engine Model | WD615.93E, 213 kW (290 hp) |
| Emission Standard | Euro III |
| Gearbox | HW19710, 10 forward gears and 2 reverse gears |
| Wheelbase | 4,600 mm |
| Wheel Track (Front/Rear) | 2,022 mm / 1,850 mm |
| GVW (Gross Vehicle Weight) | 16,000 kg |
| Curb Weight | 14,800–15,200 kg (completed vehicle) |
| Tire Size | 11.00R20 all-steel radial heavy-duty tires |
| Cab | HOWO HW76 flat-roof crew cab with one sleeper berth, four-point suspension, hydraulic tilting, air-suspension driver's seat and A/C |




