Hubei Huixin Truck Co., Ltd

Crane Truck

SHACMAN 8×4 35,000 kg Folding-Arm Crane Truck

Crane Brand/Model: Changxing SQZ7008
Boom Type: Knuckle 8 Section
Max. Lifting Capacity: 35000 kg
Max. Lifting Height: 20.4 m
Drive Type: 8 x 4
Engine Power: 257 kW
Cargo Box Dimensions: 8200 × 2450 × 600
70 t·m folding-arm crane with 35-ton lifting capacity, 17.4 m working radius and 8×4 SHACMAN chassis for heavy cargo lifting and transport.
Description Spec Sheet
Description

SHACMAN 8×4 Changxing SQZ7008 Folding-Arm Truck-Mounted Crane

The SHACMAN 8×4 truck-mounted crane combines a Euro III heavy-duty chassis with the Changxing SQZ7008 folding-arm crane and a long side-board cargo body. The vehicle is configured for heavy lifting, cargo transport, self-loading and unloading, and construction equipment handling where high lifting capacity and onboard transport are required.

70 t·m Folding-Arm Crane with 35-Ton Capacity

The Changxing SQZ7008 provides a rated lifting moment of 700 kN·m and a maximum rated lifting capacity of 35,000 kg at the minimum working radius. Its eight-section folding and telescopic boom reaches a maximum working radius of 17.4 m and a lifting height of 20.4 m, with continuous 360° slewing.

Eight-Section HG785 High-Strength Boom

The main folding boom and seven telescopic sections use HG785 high-strength steel in a hexagonal box-type structure. Wear-resistant nylon sliders, telescopic wire ropes, reinforced boom pins, and an end-mounted safety-latch hook are used throughout the boom assembly.

240 L/min Dual-Pump Hydraulic System

Two high-pressure piston pumps driven through the chassis PTO provide a combined hydraulic flow of approximately 240 L/min at a rated system pressure of 30 MPa. The circuit uses multi-stage filtration, hydraulic cooling, counterbalance valves, and integrated overload protection for the boom, telescopic, slewing, winch, and outrigger functions.

8.6 m H-Type Outrigger Support System

The crane uses dual-stage front H-type outriggers together with fixed rear outriggers, providing a maximum lateral span of 8.6 m and longitudinal span of 5.9 m. Hydraulic locks help prevent unintended retraction, while optional sliding rear outriggers and automatic leveling can be supplied for specific operating requirements.

SHACMAN 8×4 Heavy-Duty Euro III Chassis

The standard chassis is powered by the Weichai WP10.350E32 9.726-liter inline-six diesel engine, rated at 257 kW (350 hp) and 1,400 N·m, matched to a FAST 10JSD160 10-speed manual transmission. Two steering axles, two 16-ton hub-reduction drive axles, differential locks, heavy-duty leaf springs, and 12.00R20 18PR tires support the 31,000 kg GVW configuration.

Reinforced Frame and Long Cargo Body

The three-layer 8 + 5 + 8 mm high-strength frame includes a full-length crane subframe with local reinforcement around the crane mounting area. The side-board cargo body is available in approximately 7.8–8.6 m lengths, with high-strength steel side panels, a reinforced floor, removable side panels, and dense cross-members for general cargo transport.

Manual Crane Controls and Safety Protection

The standard crane is operated from a side-mounted manual control station, with wireless remote control available as an option. Load moment limitation, upper hook overwind protection, hydraulic outrigger locks, pressure relief protection, slewing buffering, and hydraulic oil temperature monitoring are incorporated into the crane safety system.

Spec Sheet

Truck-mounted Crane Parameters

ItemDetails
Crane Brand/ModelChangxing SQZ7008 Folding-Arm Truck-Mounted Crane
Max. Lifting Capacity35,000 kg at minimum working radius
Max. Working Radius17.4 m
Max. Lifting Height20.4 m from ground to hook
Boom TypeFolding / Telescopic Boom, hexagonal box-type structure made of HG785 high-strength steel
Boom Sections8 sections, consisting of the main folding boom and 7 telescopic sections
Slewing Angle360° continuous rotation, 0–2.5 rpm continuously adjustable
Hydraulic System Pressure30 MPa rated pressure, approximately 240 L/min combined hydraulic flow
Operation ModeManual side-mounted hydraulic control valve station
Outrigger TypeH-type dual-stage front hydraulic outriggers with fixed rear outriggers; maximum lateral span 8.6 m
Optional DevicesRemote control, Top seat, sliding rear outriggers, enlarged outrigger pads, automatic one-button leveling system, load moment limiter, slewing limitation system, lifting basket and hydraulic attachments

Chassis Parameters

ItemDetails
Chassis Brand/ModelSHACMAN F3000 / New M3000 8×4 Heavy-duty Chassis
Drive Type8×4, twin front steering axles + twin rear drive axles
Engine PowerWeichai WP10.350E32 / 257 kW (350 HP) at 2200 rpm
Emission StandardEuro III
GearboxFAST 10JSD160 / 10-speed manual transmission; 9 forward + 1 reverse
Wheelbase1800 + 4575 + 1400 mm
Wheel Track (Front/Rear)
GVW (Gross Vehicle Weight)31,000 kg
Curb WeightApprox. 12,800 kg chassis curb weight, excluding crane and cargo body
Tire Size12.00R20 18PR all-steel radial tires
CabSHACMAN F3000 extended mid-roof cab with hydraulic cab tilting system, air-suspension driver's seat, power windows, central locking, heater and radio
Cargo Box Dimensions8200 / 8500 × 2450 × 600 mm, standard side-board cargo body with removable side panels, 3 mm side panels and 5 mm floor plate

Send your message to us

Related Products