Hubei Huixin Truck Co., Ltd

Oil Tanker Truck

FAW JH6 6×4 20000L Diesel and Gasoline Transport Truck

Tank Capacity: 20000L / 21000L
Compartments: 2 or 3
Pump Capacity: 80 m³/h
Hoses / Nozzles: 15 m, Ø80 mm
Chassis Brand/Model: FAW JH6
Drive Type: 6 x 4
Engine Power: 213 kW (290 hp)
Corrugated anti-surge baffles, independent compartment options and DN100 emergency shut-off equipment support bulk fuel delivery with flexible loading and unloading arrangements.
Description Spec Sheet
Description

FAW JH6 6×4 20 m³ Fuel Tanker Truck

The FAW JH6 6×4 fuel tanker is configured for bulk fuel transportation with a nominal 20 m³ tank, a three-axle hazardous-material chassis, and a PTO-driven unloading pump. The Xichai CA6DL1-29 series six-cylinder diesel engine is rated at 213 kW (290 hp), paired with an eight-speed manual transmission as standard. The tank can be configured with multiple independent compartments for separate fuel delivery operations.

20 m³ Steel Tank with Anti-Surge Baffles

The tank has a stated geometric volume of 19.5 m³ and uses Q235-B carbon steel, with a 4.5 mm shell and 5 mm dished end heads. Internal corrugated baffles, approximately 4–5 in number, are spaced no more than 1,500 mm apart to reduce liquid movement during braking, acceleration, and cornering. A single compartment is standard, with optional two- or three-compartment arrangements for separate product handling.

High-Capacity PTO-Driven Fuel Pump Options

Two proposed unloading pump options are available: the 80YHCB-80 rated at 80 m³/h and the 100YHCB-100 rated at 100 m³/h, both with a stated working pressure of 0.4 MPa and rated speed of 960 rpm. Driven through the gearbox PTO and drive shaft, these pumps are intended to shorten bulk unloading cycles compared with the original 30 m³/h pump. Actual transfer rates depend on pump speed, fuel properties, hose length, piping layout, and operating conditions.

Compartment Valves and Emergency Shut-Off

The fuel handling system includes a DN100 bottom emergency shut-off valve with pneumatic and manual operation, quick-connect couplings, and a four-position, three-way aluminum-alloy ball valve. The tank top is equipped with a 500 mm European-style manhole, breather valve, overfill probe, and emergency pressure-relief device. The final valve and piping arrangement should be matched to the selected tank compartment layout and intended loading and unloading methods.

FAW JH6 Chassis and Powertrain

The chassis uses a 6×4 drive configuration with a 4,500 + 1,350 mm wheelbase and reinforced double-layer steel frame rails. The Xichai CA6DL1-29 series engine delivers 213 kW (290 hp) and 1,100 N·m of torque, with a FAST 8JS118A eight-speed manual transmission as standard and a FAST 10JSD120 ten-speed transmission available as an option. The specified running gear includes tandem rear drive axles, a standard differential lock, and 11.00R20 18PR all-steel radial tires.

Tank Construction and Corrosion Protection

Automatic welding is specified for the tank's longitudinal and circumferential seams, followed by a stated 0.06 MPa air-pressure holding test. The listed surface treatment includes internal sandblasting and anti-corrosion passivation, with an external epoxy zinc-rich primer and polyurethane topcoat. A non-slip top walkway, safety guardrails, rear access ladder, and reflective side protection support inspection access and vehicle visibility.

Fuel Level Monitoring and Delivery Options

A side-mounted mechanical float gauge is specified for standard tank-level indication, with a stated display accuracy of ±2%. Optional equipment includes an electronic level gauge, flow meter, vehicle-mounted fuel dispenser, 15 m automatic-return hose reel, tank insulation and heating, and remote tank-level monitoring. Multi-compartment configurations can support separate product delivery when the tank and piping are designed for the intended fuels.

Dangerous-Goods Safety Equipment

The specified safety equipment includes tank grounding terminals, two conductive rear drag straps, two 4 kg dry-powder fire extinguishers, an exhaust spark arrester, and a tank firefighting connection. The chassis is also listed with ABS, an exhaust brake, automatic brake slack adjusters, a speed limiter, and Beidou/GPS vehicle monitoring. Final hazardous-material certification, emergency valve performance, pump suitability, and applicable emission configuration should be confirmed for the exact export vehicle.

Bulk Fuel Transport and Distribution Applications

This FAW JH6 tanker is suited to bulk diesel delivery, fuel depot replenishment, and industrial or commercial fleet supply. The larger pump options are intended for operations where unloading time is a priority, while optional metering and dispensing equipment can support controlled fuel delivery. The actual legal payload and working fill volume must be confirmed against the completed vehicle weight, fuel density, tank design, axle-load limits, and applicable filling regulations.

Spec Sheet

Fuel Tanker Parameters

ItemDetails
Tank SizeApprox. 7,000 × 2,400 × 1,700 mm
Tank Capacity19,500 L geometric volume; nominal tank class 20,000 L (20 m³)
Tank MaterialQ235-B carbon steel, 4.5 mm shell, 5 mm dished heads
BafflingCorrugated anti-surge baffles, 4 mm thick, spaced at intervals of no more than 1,500 mm; approximately 4–5 baffles
Compartment & CapacitySingle compartment standard; optional 2–3 independent compartments
Pump Model/TypeOptional 80YHCB-80 arc-tooth gear pump, 80 m³/h at 0.4 MPa, or 100YHCB-100, 100 m³/h at 0.4 MPa; 960 rpm, PTO-driven, reversible pumping subject to piping configuration
Flow MeterOptional flow meter
Hoses / NozzlesDN80 / DN100 quick-connect fittings; optional 15 m automatic-return fuel hose reel and vehicle-mounted fuel dispenser
Safety and ComplianceEmergency shut-offs, grounding, vapor recovery system, API-compliant connections
OptionalFlow meter, recirculation system, fueling device

Chassis Parameters

ItemDetails
Chassis Brand/ModelFAW JH6 CA1250P1K2L4T1BE5A80
Drive Type6×4, twin rear drive axles
Engine Model / PowerXichai CA6DL1-29 series, 213 kW (290 hp), inline 6-cylinder turbocharged and intercooled diesel engine
Emission StandardChina III or China V, depending on engine configuration
Gearbox / GearsFAST 8JS118A, 8-speed manual; optional FAST 10JSD120, 10-speed manual
Wheelbase4,500 + 1,350 mm
Wheel Track (Front/Rear)1,964 mm / 1,860 mm / 1,860 mm
GVW25,000 kg
Curb WeightApprox. 8,200–8,500 kg (chassis curb weight)
Tire Size11.00R20, 18PR all-steel radial tires
CabFAW JH6 flat-roof cab with four-point mechanical suspension, air conditioning, power windows, central locking and adjustable seat

Send your message to us

Related Products
J6M 20,000 L Fuel Tanker Truck
J6M 20,000 L Fuel Tanker Truck
Aug .31.2026
FAW J6M 64 20,000 L fuel tanker truck with 320 hp...
NG80 20,000L Oil Tanker Truck
NG80 20,000L Oil Tanker Truck
Aug .06.2026
Beiben NG80 64 20m³ fuel tanker truck with Q235 s...
20,000L Oil Tank Truck
20,000L Oil Tank Truck
Jul .26.2026
20m³ HOWO NX 64 fuel tanker truck with Euro III m...
20000L oil tanker
20000L oil tanker
Nov .15.2025
HOWO ZZ1267 64 fuel tanker with 21,000 L carbon s...