JAC Junling V5 4×2 Integrated Recovery Truck
JAC 4×2 3.5-Ton Integrated Towing and Lifting Wrecker Truck
The JAC 4×2 integrated wrecker truck combines a hydraulic lifting boom, telescopic towing arm and hydraulic winch on a light-duty chassis. Designed for roadside recovery, breakdown assistance and vehicle relocation, it operates without a flatbed and uses a compact single-row cab with seating for three.
Integrated Boom and Towing Arm
The two-section folding boom has a stated lifting capacity of approximately 3,000 kg, with a maximum working radius of 3.5 m and lifting height of 2.2 m. A separate two-section telescopic towing arm is rated at approximately 3,500 kg and uses hydraulic wheel clamps to support a disabled vehicle by its front or rear axle.
4,000 kg Hydraulic Winch
The hydraulic winch has a stated capacity of 4,000 kg and a wire rope length of 20–30 m. It assists with pulling disabled vehicles into position during recovery, while actual pulling force depends on rope-layer conditions, reeving and hydraulic system configuration.
JAC Light-Duty Chassis and Diesel Power
The vehicle is specified with a JAC HFC1045-series chassis, a 3,365 mm wheelbase and a reinforced 180 × 65 mm frame. The listed HFC4DB3-2E diesel engine produces 130 hp and is paired with a Xingrui five-speed manual transmission. The exact chassis variant, engine output and applicable emission certification should be confirmed for the selected configuration.
Hydraulic Controls and Load Management
The hydraulic system has a stated working pressure of 16 MPa, with an integrated multi-way control valve and balance valve for equipment operation and load control. Depending on the selected version, controls may be arranged on either side of the truck, and wireless remote control is available as an option. The approved load chart and hydraulic safety functions must be checked before operation.
Roadside Recovery Equipment
Standard listed equipment includes a sealed tool compartment, amber roof warning lights, work lamps, vehicle tie-down straps, L-shaped wheel-clamping brackets and an auxiliary trolley. A public-address loudspeaker supports roadside communication, while the wheel restraints and securing equipment help prepare recovered vehicles for towing.
Compact Configuration for Recovery Work
The supplied overall dimensions are approximately 5,350–5,600 mm long, 2,020 mm wide and 2,300 mm high, making the configuration suitable for consideration in urban recovery fleets and roadside assistance operations. The stated gross vehicle weight is 4,495 kg, but the estimated curb weight of 3,800–3,900 kg leaves a limited nominal payload margin. Final certified weight, axle loads and local vehicle-class requirements should be verified after the recovery equipment is installed.
Integrated Tow Truck Parameters
| Item | Details |
|---|---|
| Towing Capacity | 3,500 kg |
| Hoisting Capacity | 3,000 kg |
| Wheel-lifting Capacity | 4,000 kg |
| Wheel-lifting Length | 1,300 mm (towing arm telescopic stroke) |
| Max Hoisting Capacity (Fully Extended) | 2,000 kg at maximum working radius |
| Boom Extension Length | 1,200 mm (telescopic stroke) |
| Max Lifting Height | 2,200 mm |
| Winch Rated Pull | 40 kN (approximately 4,000 kgf) |
| Wire Rope Diameter | 14 mm |
| Wire Rope Length | 20 m |
| Operation Mode | Hydraulic pilot control |
| Outrigger Type | |
| Optional Devices | Wireless remote control (if available for the selected version) |
Chassis Parameters
| Item | Details |
|---|---|
| Chassis Brand/Model | JAC HFC1045P22K2C7ZS |
| Drive Type | 4×2, rear-wheel drive |
| Engine Model | Anhui Cummins HFC4DB3-2E, 95 kW (130 hp) |
| Emission Standard | Euro V |
| Gearbox | JAC Xingrui 5-speed manual transmission |
| Wheelbase | 3,365 mm |
| Wheel Track (Front/Rear) | 1,595 mm / 1,560 mm |
| GVW (Gross Vehicle Weight) | 4,495 kg |
| Curb Weight | 3,865 kg |
| Tire Size | 7.00R16 LT all-steel radial tires |
| Cab | Single-row cab with factory-installed A/C, power windows and central locking |
Send your message to us




