JAC Shuailing Integrated Towing and Lifting Wrecker
JAC Shuailing III 4×2 3-Ton Integrated Towing and Lifting Wrecker Truck
Built on the JAC Shuailing III HFC1042P23K1B4ZS export chassis, this 4×2 integrated wrecker combines a telescopic wheel-lifting arm, lifting boom and hydraulic winch without a flatbed. The vehicle is configured for urban roadside assistance, highway breakdown recovery and light accident-vehicle rescue. Its overall dimensions are 5995 × 2200 × 2480 mm, with a completed vehicle curb weight of 3,750 kg and a gross vehicle weight of 4,495 kg.
Telescopic Wheel-Lifting Arm for Vehicle Recovery
The rear wheel-lifting assembly uses a two-section telescopic and luffing arm made from Q690 high-strength steel. Its rated capacity is 3,000 kg with the arm retracted and 1,500 kg when fully extended. The 600 mm telescopic stroke provides an effective working length of 1,000–1,600 mm. Adjustable wheel-fork spacing ranges from 920 to 1,620 mm, allowing the operator to accommodate different vehicle track widths. The wheel forks provide a ground-clearance adjustment range of 120–830 mm.
Two-Section Lifting Boom
A two-section telescopic boom handles lifting operations at the rear of the vehicle. Its rated capacity is 3,000 kg with the boom retracted and 1,200 kg when fully extended to 3,900 mm. The working radius ranges from 1,250 to 3,450 mm, while the maximum hook lifting height is 2,650 mm. The boom operates through luffing movement without a slewing platform, keeping the lifting arrangement mechanically straightforward. The main universal towing hook has a rated capacity of 4,000 kg.
Hydraulic Winch and Recovery Accessories
The integrated hydraulic planetary winch has a rated first-layer rope pull of 40 kN, with an outer-layer pulling force of 28 kN. It is supplied with a 25 m galvanized steel wire rope measuring 10 mm in diameter, with a 30 m rope available as an option. A mechanical clutch allows the rope to be released for setup, while a hydraulic relief valve and rope travel limit protection support controlled recovery operations. Standard accessories include L-type wheel forks, tire sleeves, tire-holding clamps, auxiliary pulleys, tie-down straps, towing chains and shackles.
Hydraulic Controls and Emergency Operation
The hydraulic system uses a high-pressure gear pump with a displacement of 25 ml/r and a rated operating pressure of 18 MPa. A four-section multi-way valve controls the boom, wheel-lifting arm and associated hydraulic functions. Controls are arranged on both the left and right sides of the vehicle for access during recovery work. Direct-mounted counterbalance valves provide load-holding and anti-drop protection. The 45 L hydraulic oil tank includes oil-level and temperature gauges, while a manual emergency hydraulic pump allows the boom to be recovered with the engine switched off.
CY4102-C3F Euro III Diesel Engine and PTO Drive
Power comes from a Dongfeng Chaoyang CY4102-C3F inline four-cylinder, turbocharged and intercooled diesel engine. The 3.856 L engine delivers 70 kW (95 PS) at 2,800 rpm and maximum torque of 245 N·m at 1,600–1,800 rpm. Its mechanical inline fuel injection system and EGR emission control meet the specified Euro III configuration without requiring urea-based aftertreatment. A Lu'an LC5T28 five-speed manual transmission is paired with a side-mounted mechanical PTO, which drives the hydraulic pump through the transmission-side PTO port. Pneumatic PTO engagement includes a neutral-position interlock, and engagement is prohibited while driving.
JAC Shuailing III Chassis and Running Gear
The 3,360 mm wheelbase chassis uses a Q345B straight-through frame with a 180 × 75 × 6 mm main section. Reinforced mounting areas and pre-arranged holes accommodate the wrecker subframe and PTO installation. The front steering axle has a rated load of 1.8 tonnes, while the rear drive axle is rated at 3.5 tonnes and uses a 5.286 main reduction ratio. Reinforced rear leaf springs, 7.00R16 radial tires and a dual-circuit pneumatic braking system form the running gear. The export configuration also includes a 24 V electrical system, waterproof connectors and protected wiring.
Reinforced Subframe and Operator Equipment
The superstructure is mounted on a full-length Q345B subframe measuring 160 × 70 × 6 mm, with rubber vibration-isolating pads between the subframe and chassis frame. An anti-slip steel working platform provides a clear area of 2,800 × 2,150 mm, with a 250 mm fixed guardrail. A waterproof steel toolbox on the left side stores recovery equipment and maintenance accessories. The cab is a three-seat, single-row wide tilting design with hydraulic front tilting and manual pump assistance for cab return. A long amber LED roof warning light and two LED work lights support roadside operations.
Towing Ratings and Operating Conditions
The rated combined towing mass is 6,000 kg under straight, level-road conditions. The specified maximum towing speed is 40 km/h on straight, level roads and 15 km/h on downhill sections and curves. On gradients above 5%, the towing mass must be reduced by 50%, and the permitted towing gradient is limited to 8%. Lateral heavy-load towing is prohibited, and the vehicle has no telescopic rear outriggers. The wheel-lifting and boom capacities also vary with arm or boom extension, so operators must follow the applicable load ratings for each working position.
Integrated Tow Truck Parameters
| Item | Details |
|---|---|
| Towing Capacity | 6,000 kg (on straight, level roads) |
| Hoisting Capacity | 3,000 kg (basic boom retracted) |
| Wheel-lifting Capacity | 3,000 kg (arm retracted); 1,500 kg (arm fully extended) |
| Wheel-lifting Length | 1,000–1,600 mm |
| Max Hoisting Capacity (Fully Extended) | 1,200 kg |
| Boom Extension Length | 3,900 mm (maximum extended boom length) |
| Max Lifting Height | 2,650 mm (maximum hook lifting height) |
| Winch Rated Pull | 40 kN (first rope layer); 28 kN (outer rope layer) |
| Wire Rope Diameter | 10 mm |
| Wire Rope Length | 25 m (standard); 30 m (optional) |
| Operation Mode | Hydraulic controls on both sides of the vehicle; manual emergency hydraulic pump |
| Outrigger Type | No telescopic rear outriggers |
| Optional Devices | 30 m winch wire rope, glow-plug preheating kit, fuel-water separator, air conditioning, power windows, central locking, radio, 120 Ah battery, desert-type air intake assembly and ISO VG 68 hydraulic oil |
Chassis Parameters
| Item | Details |
|---|---|
| Chassis Brand/Model | JAC Shuailing III HFC1042P23K1B4ZS |
| Drive Type | 4×2, rear-wheel drive |
| Engine Model | Dongfeng Chaoyang CY4102-C3F, 70 kW (95 PS) |
| Emission Standard | Euro III, EGR |
| Gearbox | Lu'an LC5T28 5-speed manual transmission |
| Wheelbase | 3,360 mm |
| Wheel Track (Front/Rear) | 1,590 mm / 1,520 mm |
| GVW (Gross Vehicle Weight) | 4,495 kg |
| Curb Weight | Approximately 3,750 kg (completed vehicle) |
| Tire Size | 7.00R16 steel-belted radial tires |
| Cab | JAC Shuailing III first-generation export single-row wide tilting cab, 3 seats, hydraulic front tilting, cab heater and hydraulic power steering |




