Hubei Huixin Truck Co., Ltd

Crane Truck

Dongfeng Kinland 6×4 12-Ton Truck-Mounted Crane

Crane Brand/Model: Changxing SQS300-5
Boom Type: Telescopic 5 Section
Max. Lifting Capacity: 12000 Kg
Max. Lifting Height: 20.1 m
Drive Type: 6×4
Engine Power: 199 kW (270 hp)
Cargo Box Dimensions: 8,400 × 2,300 × 550 mm
Five-section telescopic boom, 360° slewing and 7.5 m outrigger span support equipment loading, construction material handling and site lifting.
Description Spec Sheet
Description

Dongfeng Kinland 6×4 Changxing SQS300-5 Truck-Mounted Crane

The Dongfeng Kinland 6×4 truck-mounted crane combines a 25,000 kg GVW chassis with the Changxing SQS300-5 five-section telescopic crane and an extended cargo body. The vehicle is configured for construction material handling, equipment loading, self-loading and unloading, and general cargo transportation.

SQS300-5 12-Ton Telescopic Crane

The Changxing SQS300-5 provides a rated lifting moment of 300 kN·m and a maximum rated lifting capacity of 12,000 kg at a 3 m working radius. Its five-section synchronized boom reaches a maximum working radius of 18.5 m and a specified maximum lifting height of 20.1 m, with continuous 360° rotation and a slewing speed of up to 2.5 rpm.

Dual-Pump Hydraulic System

The crane uses two gear pumps with rated flows of 63 L/min and 50 L/min, operating at a rated hydraulic pressure of 28 MPa. The 270-liter hydraulic oil tank includes an oil cooler, while the multi-way control valve integrates overload protection and make-up flow functions for crane movements.

H-Type Front Outriggers and Rear Supports

Two-stage H-type front outriggers provide a maximum support span of 7.5 m, while fixed rear supports complete the stabilization arrangement. Hydraulic outrigger locks and a level indicator help operators check support conditions before lifting, with control stations available at ground level and the elevated operator seat.

Yuchai YC6L270-30 Euro III Engine

The chassis is powered by the Yuchai YC6L270-30 8.424-liter inline-six diesel engine, rated at 199 kW (270 hp) and 1,050 N·m of torque. A FAST 9JS119TA nine-speed manual transmission and side-mounted PTO provide the driving power and hydraulic pump input required for truck-mounted crane operation.

Reinforced 6×4 Heavy-Duty Chassis

The chassis uses a 6-ton-class front steering axle and two 10-ton-class rear drive axles with inter-wheel and inter-axle differential locks. Its three-layer longitudinal frame uses 8 + 5 + 5 mm high-strength steel plates, with local reinforcement at crane mounting points, supported by multi-leaf suspension and 11.00R20 18PR all-steel radial tires.

Extended Cargo Body for Material Transport

The standard vehicle uses an extended cargo body designed to work alongside the crane for combined lifting and transportation tasks. With an overall length of 11,990 mm and a 5,700 + 1,350 mm wheelbase configuration, the layout accommodates the crane installation and cargo-loading area within the specified vehicle dimensions.

Crane Safety and Operating Controls

Standard crane safety equipment includes lifting-height and working-radius limiters, hydraulic overload protection, outrigger hydraulic locks, a level indicator, and a slewing buffer valve. Manual controls are available at ground level and the elevated operator seat, while the cab provides an interface for remote engine-throttle control.

Spec Sheet

Truck-mounted Crane Parameters

ItemDetails
Crane Brand/ModelChangxing SQS300-5 (GSQS300-5)
Max. Lifting Capacity12,000 kg at 3 m working radius
Max. Working Radius18.5 m
Max. Lifting Height20.1 m
Boom TypeFive-section synchronized telescopic straight boom
Boom Sections5 sections, synchronized extension using a main hydraulic cylinder and wire-rope reeving
Slewing Angle360° continuous rotation
Hydraulic System Pressure28 MPa, dual gear pump with flow rates of 63 L/min + 50 L/min
Operation ModeManual hydraulic controls at ground level and elevated operator seat
Outrigger TypeTwo-stage H-type front hydraulic outriggers with fixed rear supports; maximum span 7.5 m
Optional DevicesRemote control, Top seat

Chassis Parameters

ItemDetails
Chassis Brand/ModelDongfeng Kinland 6×4
Drive Type6×4, single front steering axle and tandem rear drive axles
Engine PowerYuchai YC6L270-30 / 199 kW (270 hp) at 2,200 rpm
Emission StandardEuro III
GearboxFAST 9JS119TA / 9-speed manual transmission
Wheelbase5,700 + 1,350 mm
Wheel Track (Front/Rear)1,980 / 1,860 mm
GVW (Gross Vehicle Weight)25,000 kg
Curb WeightApprox. 18,000 kg, including crane, standard cargo body and full fuel tank
Tire Size11.00R20 18PR all-steel radial tires
CabDongfeng Kinland D530 flat-roof extended cab, 3 occupants, power windows, central locking, heater and mechanically suspended driver's seat
Cargo Box Dimensions8,400 × 2,300 × 550 mm

Send your message to us

Related Products
FAW JK6 12-Ton Cargo Crane Truck
FAW JK6 12-Ton Cargo Crane Truck
Nov .14.2026
FAW JK6 64 truck mounted crane with a SANY Palfin...
SANY 12 Ton Truck-Mounted Crane
SANY 12 Ton Truck-Mounted Crane
Sep .17.2026
HOWO TX 64 truck-mounted crane with 12,000 kg lif...
JK6 12 Ton Telescopic Crane Truck
JK6 12 Ton Telescopic Crane Truck
Aug .11.2026
FAW JK6 64 truck mounted crane with 12 ton XCMG c...
CAMC 6×4 Truck-Mounted Crane
CAMC 6×4 Truck-Mounted Crane
Jun .26.2026
CAMC 64 truck-mounted crane chassis with 25,000 k...