Hubei Huixin Truck Co., Ltd

Vacuum Truck

Isuzu ELF 6,000 L Septic Vacuum Truck

Type: Sludge suction
Tank Capacity: 6000 L
Vacuum Pump: XD-300 water-ring,≥ −0.095 MPa,300 m³/h
Dumping method: Gravity discharge, DIN150
Chassis Brand/Model: ISUZU ELF 700P
Drive Type: 4 x 2
Engine Power: 147 kW (200 hp)
6 m³ tank, 10 m suction hose and 360° rear suction boom support septic tank cleaning and liquid waste collection.
Description Spec Sheet
Description

Isuzu ELF 700P / NPR 4×2 6 m³ Fecal Suction Truck – Euro III

The Isuzu ELF 700P / NPR fecal suction truck combines a 4×2 Euro III chassis with a 6,000-liter vacuum tank for septic tank cleaning, sewage collection, sludge removal, and liquid waste transportation. Its 4HK1X diesel engine, XD-300 water-ring vacuum pump, and rear-mounted rotating suction boom are configured for sanitation and wastewater handling operations.

6,000-Liter Elliptical Vacuum Tank

The horizontal tank is constructed from 5 mm Q235B carbon steel, with 6 mm formed elliptical end caps and three internal anti-surge baffles. An internal coal-tar epoxy coating provides corrosion protection, while the quick-opening top manhole, rear viewing window, and bottom drain support inspection and tank maintenance.

XD-300 Water-Ring Vacuum Pump

The XD-300 water-ring vacuum pump provides an air extraction rate of 300 m³/h and a specified ultimate vacuum of at least -0.095 MPa. Driven through a transmission-mounted pneumatic PTO and V-belt system, it supports sewage suction and pressure-assisted discharge, with a stated clean-water filling time of no more than eight minutes under the specified test conditions.

Rotating Rear Suction Boom and DN100 Hose

The rear-mounted suction boom rotates through 360° and provides a working radius of approximately 2.5 m for positioning the suction hose. The standard 10 m DN100 steel-wire-reinforced PVC hose uses quick-connect couplings, while the manual four-way valve selects suction, standby, or pressure-discharge operation.

Vacuum Protection and Discharge System

The system incorporates a float-type overflow shutoff valve, spring-loaded pressure safety valve, vacuum gauge, suction-line check valve, air-water separator, and oil-gas separator. A DN150 bottom drain supports tank emptying and cleaning, while an optional hydraulic tipping system can raise the tank to a maximum angle of 45° for unloading.

Isuzu 4HK1X Euro III Powertrain

The Isuzu 4HK1X 5.193-liter inline-four diesel engine is rated at 147 kW (200 hp) and 637 N·m of torque, paired with an MLD-6Q six-speed manual transmission. The 4×2 chassis features a 3.5-ton-class front axle, rear-wheel drive, multi-leaf spring suspension, pneumatic drum brakes, an engine exhaust brake, and 7.50R16 LT 14PR all-steel radial tires.

PTO-Driven Operation and Export Configuration

The chassis PTO supplies mechanical power to the vacuum pump, with pneumatic engagement controlled from the cab. The ELF wide-body cab accommodates three seats and includes power-assisted steering, a 24 V electrical system, and optional air conditioning. Vehicle configuration and allowable liquid load should be confirmed against the certified chassis and completed-vehicle specifications before export.

Spec Sheet

Vacuum System Parameters

ItemDetails
TypeVacuum excreta suction truck with rear-mounted rotating suction boom
Tank Capacity6,000 L effective capacity; approx. 6.3 m³ geometric volume
Pump Type / ModelXD-300 water-ring vacuum pump
Vacuum Degree / AirflowUltimate vacuum: ≥ -0.095 MPa; air extraction rate: 300 m³/h; maximum vertical suction lift: ≥7 m; horizontal suction distance: ≥30 m
Drive ModeTransmission-mounted full-power pneumatic PTO with V-belt drive
Tank Material / ThicknessQ235B carbon structural steel; shell 5 mm, front/rear elliptical heads 6 mm
Internal StructureHorizontal elliptical-section tank, approx. 3,800 mm overall length; 2 transverse anti-surge baffles with Ø150 mm flow openings; coal-tar epoxy internal coating; Ø500 mm top manhole; float-type overflow protection and spring-loaded safety valve
BoomRear-mounted 360° rotatable suction hose boom with locking and positioning mechanism; working radius 2.5 m
Suction HoseDN100 steel-wire-reinforced PVC corrugated hose, 10 m standard length, with quick-connect couplings
Discharge MethodGravity discharge through DN150 bottom drain valve; positive-pressure discharge; optional hydraulic tank tipping with rear-cover opening

Chassis Parameters

ItemDetails
Chassis Brand/ModelQingling Isuzu ELF 700P / NPR, QL11009KARY
Drive Type4×2 rear-wheel drive
Engine Model / PowerIsuzu 4HK1X, 5.193 L inline 4-cylinder turbocharged and intercooled diesel, 147 kW (200 hp) @ 2100 rpm; maximum torque 637 N·m @ 1600 rpm
Emission StandardEuro III / EU Stage IIIA
Gearbox / GearsIsuzu MLD-6Q, 6-speed manual, 6 forward + 1 reverse
Wheelbase3815 mm
Wheel Track (Front/Rear)1680 / 1650 mm
GVW9995 kg
Curb WeightApprox. 5450 kg, chassis and completed-vehicle figures to be confirmed against the final configuration
Tire Size7.50R16 LT, 14PR all-steel radial tires; 6 tires including 1 spare
CabIsuzu ELF wide-body single-row cab, 3 seats, original ELF door emblem; optional air conditioning

Send your message to us

Related Products
700P 5.5m³ Vacuum Sewage Truck
700P 5.5m³ Vacuum Sewage Truck
Aug .24.2026
Isuzu 700P 42 5.5m³ vacuum sewage truck with a ro...