FOTON AUMARK S3 4×2 8,000 L Vacuum Sewage Truck
FOTON AUMARK S3 4×2 8,000 L Vacuum Sewage Suction Truck
The FOTON AUMARK S3 vacuum sewage suction truck is configured with an 8,000-liter cylindrical sewage tank and an Italian Jurop PN84D vacuum pump. Its vacuum suction and positive-pressure discharge functions support septic tank cleaning, sewage collection, liquid waste transfer and municipal sanitation work. The vehicle is supplied with Auresgaz and FG custom branding.
Italian Jurop PN84D Vacuum Pump
The truck uses an Italian-made Jurop PN84D rotary vane vacuum and pressure pump, driven through the gearbox-mounted side PTO. The pump has a stated theoretical airflow of 540 m³/h, ultimate vacuum of -0.092 MPa and maximum positive pressure of 1.5 bar. Its air-cooled cast-iron housing, Kevlar aramid vanes and forced-pressure lubrication system are designed for continuous vacuum and pressure operations.
Vacuum Separation and Overflow Protection
The pump system includes an inlet-side water-gas separator to intercept liquid and moisture before they reach the pump, along with an oil-gas separator to recover lubricating oil at the outlet. A tank-top overflow protection valve interrupts the vacuum circuit when the tank reaches its filling limit. The four-way reversing valve, vacuum gauge, pressure regulator and safety valve support switching and monitoring during suction and discharge operations.
8 m³ Heavy-Duty Sewage Tank
The horizontal cylindrical tank has an effective capacity of 8 m³ and is fabricated from Q235 carbon steel, with a 6 mm shell and 8 mm elliptical heads. Internal anti-sloshing baffles help limit liquid movement during transport. The tank uses hydraulic tipping at an approximate 45° angle and a hydraulically operated rear cover with a locking mechanism for sludge discharge and tank cleaning.
Vacuum Suction and Pressure Discharge
The specified suction performance includes a vertical lift of at least 9.5 m and a horizontal suction distance of at least 20 m. Positive-pressure delivery is listed at 30 m or more, allowing collected sewage to be discharged where gravity drainage is unsuitable. The system also supports gravity discharge through a large-bore rear ball valve, with an external sight tube for checking the tank liquid level.
DN100 Suction Hose and Pipeline Assembly
The main vacuum pipeline uses DN100 galvanized steel pipe with flanged connections and FKM rubber seals. A rotatable and liftable hard suction arm is mounted on top of the tank, while the standard 8 m orange steel-wire-reinforced vacuum hose has quick couplers at both ends. Side-mounted hose brackets and an integrated toolbox provide storage for hoses, couplings, seals and service parts.
FOTON AUMARK S3 Chassis and Cummins Power
The vehicle is built on a FOTON AUMARK S3 4×2 chassis with a 3,800 mm wheelbase and a three-seat single-row cab. Its FOTON Cummins ISF3.8s3141 engine is a 3.76 L turbocharged and intercooled diesel unit rated at 105 kW (141 hp), paired with a WLY 6TS55 six-speed manual transmission. A gearbox-mounted side PTO supplies power to the vacuum pump, with pneumatic cab controls for PTO engagement and system operation.
Hydraulic Discharge and Operating Safety
The hydraulic system operates the tank tipping mechanism and rear-cover locking cylinder through a gear pump, multi-way control valve and high-pressure hoses. A surrounding top handrail, vertical access ladder, safety interlock arrangement and audible operating alarm support routine operation. The listed vehicle dimensions are 6,950 × 2,280 × 3,050 mm, with the completed configuration intended for sewage collection and liquid waste handling.
Vacuum System Parameters
| Item | Details |
|---|---|
| Type | 8 m³ vacuum sewage suction truck with hydraulic tank tipping, hydraulic rear-cover opening and roof-mounted rotatable suction arm |
| Tank Capacity | 8,000 L (8 m³ effective volume) |
| Pump Type / Model | Italian Jurop PN84D air-cooled, oil-lubricated rotary vane vacuum and pressure pump |
| Vacuum Degree / Airflow | Ultimate vacuum: -0.092 MPa; theoretical airflow: 540 m³/h; maximum positive pressure: 1.5 bar |
| Drive Mode | Gearbox side-mounted spline PTO, drive shaft transmission; pneumatic PTO control from the cab |
| Tank Material / Thickness | Q235 carbon steel; tank shell: 6 mm; elliptical heads: 8 mm |
| Internal Structure | Horizontal cylindrical tank with anti-sloshing baffles; sandblasted surface with anti-rust primer and topcoat; hydraulic rear cover with locking mechanism; manhole, overflow protection valve and external liquid-level sight tube |
| Boom | Roof-mounted rotatable and liftable hard suction arm |
| Suction Hose | 8 m DN100 (4-inch) orange steel-wire-reinforced vacuum hose with quick couplings at both ends |
| Discharge Method | Hydraulic tank tipping at approximately 45° and hydraulic rear-cover opening; positive-pressure discharge through the rear outlet, with gravity discharge for small volumes |
Chassis Parameters
| Item | Details |
|---|---|
| Chassis Brand/Model | FOTON AUMARK S3 |
| Drive Type | 4×2, single rear axle |
| Engine Model / Power | FOTON Cummins ISF3.8s3141, 3.76 L inline 4-cylinder turbocharged and intercooled diesel engine, 105 kW (141 hp) at 2,600 rpm; maximum torque: 450 N·m |
| Emission Standard | Euro III |
| Gearbox / Gears | WLY 6TS55, 6-speed manual transmission |
| Wheelbase | 3,800 mm |
| Wheel Track (Front/Rear) | 1,730 / 1,630 mm |
| GVW | |
| Curb Weight | |
| Tire Size | 7.50R16 steel radial tires; optional 8.25R16 |
| Cab | FOTON AUMARK S3 single-row wide cab, 3 seats, with FOTON family grille, split headlamps and custom FG logo |
Send your message to us




