Isuzu ELF 100P Mobile Diesel Refuelling Truck
Isuzu 100P ELF 5,000 L Diesel Fuel Tanker Truck
The Isuzu 100P ELF diesel fuel tanker combines a 4×2 dangerous-goods chassis with a 5,000-liter steel tank and a PTO-driven fuel transfer system. Powered by the 2.999 L Isuzu 4KH1-E3 diesel engine rated at 88 kW (120 hp), this Euro III configuration is designed for diesel delivery, depot replenishment, and fuel transfer at industrial or commercial sites.
5,000-Liter Steel Fuel Tank
The horizontal tank has an elliptical cross-section and is manufactured from Q235-B carbon steel, with a 4 mm shell and 5 mm end heads. Its stated dimensions are approximately 3,600 × 1,800 × 1,150 mm, with a single-compartment layout and one internal anti-surge baffle. An optional two-compartment configuration can support separate fuel storage, subject to the final tank design.
PTO-Driven Fuel Pump and Transfer Piping
The 60YHCB-30 arc-tooth gear pump has a specified flow rate of 30 m³/h, a rated pressure of 0.6 MPa, and a suction lift of 5 m. A transmission-mounted pneumatic PTO drives the pump through a propeller shaft. The system includes DN60 piping, a three-way selector valve for suction, discharge, and recirculation, two sets of quick couplings, and two 5 m oil-resistant discharge hoses.
Fuel Dispensing and Delivery Options
The tanker can be configured with a vehicle-mounted fuel dispenser featuring metering, pricing, and IC card functions. Optional equipment includes a 15 m automatic-rewind hose reel with fuel nozzle, an oval gear flow meter with a stated accuracy of ±0.5%, and a closed bottom-loading and unloading arrangement for compatible depot facilities. The selected equipment determines the final dispensing functions and operating configuration.
Isuzu 4×2 Chassis and Diesel Powertrain
The Isuzu 100P NKR/ELF chassis uses the 4KH1-E3 four-cylinder turbocharged and intercooled diesel engine, producing 88 kW (120 hp) at 3,400 rpm and 280 N·m of torque between 1,700 and 2,200 rpm. A five-speed Isuzu MSB-5SM manual transmission, 5.571 rear axle ratio, and 7.00R16LT 14PR radial tires form the running gear. The stated chassis wheelbase is 3,360 mm, with a gross vehicle weight of 7,300 kg.
Tank Access and Corrosion Protection
The tank is specified with a DN500 aluminum alloy manhole, an all-weather flame-arresting breather valve, an anti-slip top walkway, side guardrails, and a rear access ladder. An internal epoxy coal-tar coating and an external anti-corrosion primer with polyurethane topcoat protect the steel surfaces. A sediment collection sump is provided for drainage and maintenance.
Emergency Shut-Off and Fire Protection
The safety configuration includes a pneumatically operated bottom emergency shut-off valve with cab-side remote control, an overfill probe with audible and visual alarms, a static grounding system, and an exhaust spark arrestor. Two 4 kg dry-powder fire extinguishers, side guards, rear underrun protection, and red-and-white reflective markings are also specified. Impact-activated shut-off capability and all dangerous-goods compliance requirements should be confirmed for the exact finished vehicle.
Diesel Transport and On-Site Fuel Supply
This 5 m³ tanker is suited to diesel delivery for construction equipment, agricultural machinery, industrial facilities, and commercial vehicle fleets. Optional dispensing equipment supports controlled fuel distribution where permitted. The final operating payload must account for the actual completed vehicle weight and diesel density, while the tank, valves, hazard labels, and vehicle certification must match the applicable transport regulations.
Fuel Tanker Parameters
| Item | Details |
|---|---|
| Tank Size | 3,600 × 1,800 × 1,150 mm (approx.) |
| Tank Capacity | 5,000 L (5 m³) |
| Tank Material | Q235-B carbon steel, 4 mm shell, 5 mm heads |
| Baffling | 1 internal annular anti-surge baffle, 4 mm thick |
| Compartment & Capacity | Single compartment, 5,000 L; optional two-compartment configuration |
| Pump Model/Type | 60YHCB-30 arc-tooth gear oil pump, 30 m³/h rated flow, 0.6 MPa rated pressure, 5 m suction lift, PTO-driven |
| Flow Meter | Optional oval gear flow meter, stated accuracy ±0.5% |
| Hoses / Nozzles | 2 × 5 m oil-resistant discharge hoses with quick couplings; optional fuel dispenser with 15 m automatic-rewind hose reel and fuel nozzle |
| Safety and Compliance | Emergency shut-offs, grounding, vapor recovery system, API-compliant connections |
| Optional | Flow meter, recirculation system, fueling device |
Chassis Parameters
| Item | Details |
|---|---|
| Chassis Brand/Model | Qingling Isuzu 100P (NKR/ELF) Dedicated Dangerous Goods Transport Chassis |
| Drive Type | 4×2 |
| Engine Model / Power | Isuzu 4KH1-E3, 88 kW (120 hp), 2.999 L inline 4-cylinder turbocharged and intercooled diesel engine |
| Emission Standard | Euro III |
| Gearbox / Gears | Isuzu MSB-5SM, 5-speed manual transmission |
| Wheelbase | 3,360 mm |
| Wheel Track (Front/Rear) | 1,504 mm / 1,525 mm |
| GVW | 7,300 kg |
| Curb Weight | Approx. 3,100 kg (chassis curb weight as specified) |
| Tire Size | 7.00R16LT, 14PR all-steel radial tires, 6 road tires + 1 spare |
| Cab | Isuzu ELF forward-control single-row tilting cab, 3-person capacity, power steering, factory-installed A/C, central locking, power windows and radio with USB; LHD or RHD according to export requirements |




