Shaanxi X3000 8×4 Fuel Transport Tanker
Shaanxi X3000 8×4 30 m³ Fuel Tanker Truck – Central Asia Export Version
The Shaanxi X3000 8×4 fuel tanker combines a heavy-duty chassis with a 30,000-liter geometric-capacity carbon-steel tank and a PTO-driven fuel transfer system. The configuration is intended for bulk diesel, gasoline, kerosene, and similar fuel transportation in Central Asian export markets, with Euro II emissions as standard and Euro III available as an option.
30 m³ Carbon-Steel Tank with Compartment Options
The horizontal elliptical tank uses Q235-B carbon steel, with a 6 mm shell, 8 mm dished end caps, and 4 mm internal anti-surge baffles. The standard tank has one compartment, while two- or three-compartment configurations are available for carrying separate fuel products. The stated 30 m³ capacity is geometric; actual loading volume must follow the approved payload, fuel density, axle loads, and tank filling limits.
PTO-Driven 60YHCB-30 Fuel Transfer Pump
The 60YHCB-30 circular-arc gear pump provides a rated flow of 30 m³/h and a rated pressure of 0.3 MPa. Driven through the transmission-mounted QH50 PTO, the system supports pump-assisted fuel loading and unloading, with bidirectional pumping capability specified for the configuration and a pressure-relief bypass line to protect the piping circuit.
Aluminum-Alloy Valves and Fuel Piping
The fuel system includes a DN80 pneumatic emergency bottom shut-off valve, two DN80 side discharge ball valves, and aluminum-alloy fuel piping. The European-style 500 mm manhole integrates a breather valve, overfill-probe interface, and emergency pressure-relief function, while a 100-mesh stainless-steel filter is installed at the filling inlet.
Weichai WP12.400N Heavy-Duty Powertrain
The standard engine is the Weichai WP12.400N 11.596-liter inline-six diesel, rated at 294 kW (400 hp) and 1,920 N·m of torque. A mechanical in-line injection pump, turbocharging with air-to-air intercooling, and a FAST 10JSD180 manual transmission form the main powertrain, with a QH50 PTO supplying power to the fuel pump.
8×4 Chassis and Reinforced Frame
The chassis uses two front steering axles and two heavy-duty rear drive axles, supported by a double-layer high-strength steel frame with an 850 × 300 mm section. Multi-leaf spring suspension, a 5.262 main reduction ratio, ZF 8098 hydraulic power steering, and 12.00R20 all-steel radial tires are specified for heavy-load operation on paved roads and challenging routes.
Fuel Transport Safety Equipment
The specified safety equipment includes a pneumatic emergency shut-off valve, tank breather and pressure-relief functions, static-discharge drag chains, two 4 kg dry-powder fire extinguishers, reflective markings, Class 3 flammable-liquid placards, and reinforced rear impact protection. Final hazardous-goods compliance depends on the approved vehicle and tank design, component certifications, and regulations in the destination market.
Export Cab and Optional Refueling Equipment
The X3000 medium-length cab includes a sleeper berth, four-point hydraulic damping suspension, an air-suspension driver's seat, air conditioning, power windows, central locking, and an English-labeled instrument panel. Optional equipment includes an aluminum-alloy tank, multi-compartment layout, mobile fuel dispenser with a 15 m hose reel, electronic level gauge, grounding alarm, GPS tracking, and additional driver-assistance systems.
Fuel Tanker Parameters
| Item | Details |
|---|---|
| Tank Size | Approx. 11,980 × 2,550 × 3,650 mm (overall vehicle dimensions) |
| Tank Capacity | 30,000 L (30 m³ geometric capacity) |
| Tank Material | Q235-B carbon steel, 6 mm shell, 8 mm dished heads |
| Baffling | Fully welded anti-surge baffles, 4 mm thick, at approximately 1.5 m intervals |
| Compartment & Capacity | Single compartment, 30,000 L; optional 2- or 3-compartment configuration |
| Pump Model/Type | 60YHCB-30 circular-arc gear pump, 30 m³/h rated flow, 0.3 MPa rated pressure, 5 m self-priming height, PTO-driven |
| Flow Meter | Optional electronic liquid-level gauge; fuel flow meter not specified |
| Hoses / Nozzles | DN80 aluminum alloy fuel piping, 2 × DN80 discharge valves, optional 70 L/min fuel dispenser with 15 m hose reel and automatic shut-off nozzle |
| Safety and Compliance | Emergency shut-offs, grounding, vapor recovery system, API-compliant connections |
| Optional | Flow meter, recirculation system, fueling device |
Chassis Parameters
| Item | Details |
|---|---|
| Chassis Brand/Model | SHACMAN X3000 8×4 Fuel Tanker Chassis |
| Drive Type | 8×4, two front steering axles and two rear drive axles |
| Engine Model / Power | Weichai WP12.400N, 294 kW (400 hp), 11.596 L inline 6-cylinder turbocharged and intercooled diesel engine |
| Emission Standard | Euro II standard; Euro III optional |
| Gearbox / Gears | FAST 10JSD180, 10 forward gears + 2 reverse gears, manual transmission |
| Wheelbase | 1,800 + 4,575 + 1,400 mm |
| Wheel Track (Front/Rear) | 2,030 mm / 1,860 mm |
| GVW | 31,000 kg |
| Curb Weight | Approx. 14,800 kg |
| Tire Size | 12.00R20 all-steel radial tires, 10 running tires + 1 spare |
| Cab | SHACMAN X3000 medium-length flat-roof cab with one sleeper berth, four-point hydraulic damping suspension, air-suspension driver's seat, manual A/C, power windows, central locking, electrically heated mirrors and amber warning beacon |
Send your message to us




