ISUZU 4×2 5 m³ Septic Tank Cleaning Truck
ISUZU KV600 4×2 5 m³ Vacuum Sewage Suction Truck
The ISUZU KV600 vacuum sewage suction truck is configured with a 5 m³ elliptical sewage tank, a Weilong 50QZXDH-68/7000 rotary vane vacuum pump and a hydraulically operated suction boom. Its combination of vacuum collection, positive-pressure transfer and full-opening rear-cover discharge is intended for septic tank cleaning, sewer sludge collection and municipal sanitation work.
Weilong Rotary Vane Vacuum Pump
The truck is equipped with a Weilong 50QZXDH-68/7000 single-stage, oil-lubricated rotary vane vacuum pump. At a rated speed of 800 rpm, the specified theoretical pumping speed is 68 L/s (244.8 m³/h), with an ultimate absolute pressure of 7,000 Pa. The air-cooled pump uses bakelite polymer vanes, N32 vacuum pump oil and a built-in gas ballast valve, with a stated shaft power of 5 kW.
5 m³ Elliptical Sewage Tank
The horizontal elliptical tank has a nominal capacity of 5,000 L and an effective working volume of approximately 4,650 L, leaving reserved space for overflow protection. It is manufactured from Q235-B carbon steel, with a 5 mm shell and 6 mm elliptical heads. Two transverse anti-surge baffles help control liquid movement during transport, while internal sandblasting and epoxy coal tar pitch coating provide the specified internal surface treatment. SUS304 stainless steel is available as an optional tank material.
Hydraulic Suction Boom and DN100 Hose
A foldable hydraulic boom mounted above the tank supports suction hose positioning and can rotate horizontally through ±120°. Its lifting and rotation functions are operated by hydraulic cylinders, with electric push-button and manual multi-way valve controls. The standard suction hose is an 8 m DN100 wire-reinforced PU corrugated hose with aluminium camlock couplings, while the specified vertical suction lift is at least 7 m.
Dual-Mode Sewage Discharge
The main discharge method uses a fully hydraulic rear cover that opens to at least 95°, allowing thick sludge and solid-rich sewage to empty by gravity. Two hydraulic cylinders operate the rear cover, which uses a wide nitrile rubber gasket and hydraulic-mechanical double locking. For liquid waste transfer, the pump can switch to positive-pressure mode and discharge through a DN100 pipeline, with maximum positive pressure limited to 0.04 MPa by the pressure relief system.
Vacuum Separation and Tank Protection
The vacuum circuit includes a primary water-gas separator to intercept liquid droplets and sewage splashes, followed by a secondary oil-gas separator that recovers pump lubricant. A float-type overflow shut-off valve automatically closes the suction path when the tank reaches its preset liquid level. The system also includes a shockproof vacuum gauge, pressure relief valve and manual vent valve for monitoring and pressure control.
ISUZU KV600 Chassis and 4KH1-T Engine
The vehicle is built on the ISUZU KV600 / NQR QL1080BUKACY 4×2 chassis, with a 3,360 mm wheelbase and a three-person tiltable cab. Its 3.0 L ISUZU 4KH1-T turbocharged and intercooled diesel engine delivers 96 kW (130 hp) and 290 N·m of torque, paired with an ISUZU MSB five-speed manual transmission. A pneumatic side-mounted PTO drives the vacuum pump through a universal driveshaft and elastic coupling.
Hydraulic Controls and Operating Accessories
The hydraulic system is supplied by an engine-driven gear pump through the PTO and has a stated working pressure of 16 MPa, with overload protection at 18 MPa. It operates the suction boom and rear-cover cylinders through a multi-way directional valve. Standard equipment also includes a top safety handrail, liquid level sight tube, rear working lamp, reflective markings, static grounding chain, spare pump vanes and service tools.
Compact Configuration for Sanitation Operations
The specified complete vehicle dimensions are 6,250 × 2,200 × 2,750 mm, with a GVW of 8,280 kg and an estimated curb weight of 4,650 kg. The 5 m³ tank and hydraulic boom arrangement provide a compact configuration for septic sewage collection, sewer maintenance and sludge transfer. Actual payload and permitted operating loads should be confirmed against the completed vehicle's certification and axle-load limits.
Vacuum System Parameters
| Item | Details |
|---|---|
| Type | 5 m³ vacuum sewage suction truck with hydraulic rotating and lifting suction boom and fully hydraulic quick-opening rear cover |
| Tank Capacity | 5,000 L nominal capacity; 4,650 L effective working volume |
| Pump Type / Model | Weilong 50QZXDH-68/7000, single-stage oil-lubricated rotary vane vacuum pump |
| Vacuum Degree / Airflow | Ultimate absolute pressure: 7,000 Pa; vacuum degree: approx. 93%; equivalent vacuum gauge pressure: approx. −0.093 MPa; theoretical pumping speed: 68 L/s (244.8 m³/h) |
| Drive Mode | Side-mounted gearbox PTO with pneumatic engagement; universal driveshaft and elastic coupling; rated PTO speed: 800 rpm |
| Tank Material / Thickness | Q235-B carbon steel; tank shell: 5 mm; elliptical heads: 6 mm; optional SUS304 stainless steel |
| Internal Structure | Horizontal elliptical tank with two transverse anti-surge baffles; internal sandblasting to Sa 2.5 and epoxy coal tar pitch coating; Φ450 mm manhole; float-type overflow shut-off valve; liquid level sight tube |
| Boom | Hydraulic rotating and lifting foldable suction boom; horizontal rotation: ±120°; electric push-button and manual multi-way valve controls |
| Suction Hose | 8 m DN100 orange wire-reinforced PU corrugated hose; aluminium camlock quick couplings |
| Discharge Method | Primary gravity discharge through fully hydraulic rear cover opening to at least 95°; auxiliary positive-pressure discharge through DN100 pipeline, maximum pressure 0.04 MPa; optional hydraulic tank tipping system |
Chassis Parameters
| Item | Details |
|---|---|
| Chassis Brand/Model | ISUZU KV600 / NQR, QL1080BUKACY |
| Drive Type | 4×2, rear-wheel drive |
| Engine Model / Power | ISUZU 4KH1-T, 3.0 L inline 4-cylinder turbocharged and intercooled diesel engine, 96 kW (130 hp) at 2,900 rpm; maximum torque: 290 N·m at 1,500–2,900 rpm |
| Emission Standard | Euro III |
| Gearbox / Gears | ISUZU MSB-5MT, 5-speed manual transmission, 5 forward gears + 1 reverse gear |
| Wheelbase | 3,360 mm |
| Wheel Track (Front/Rear) | 1,640 / 1,525 mm |
| GVW | 8,280 kg |
| Curb Weight | Approx. 4,650 kg |
| Tire Size | 7.50R16 LT, 14PR steel radial tires; 6 working tires + 1 spare |
| Cab | ISUZU KV600 single-row tiltable cab, 3-person capacity, factory-installed air conditioning, power steering, exhaust brake and ABS; left-hand drive standard, right-hand drive optional |




