Hubei Huixin Truck Co., Ltd

Vacuum Truck

ISUZU FVR 4×2 12 CBM Vacuum Suction Tanker Truck

Type: Sludge vacuum
Tank Capacity: 12000 L
Vacuum Pump: oil-lubricated rotary vane vacuum pump,136 L/s
Dumping method: lift dump, ≥45° angle
Chassis Brand/Model: ISUZU GIGA
Drive Type: 4 x 2
Engine Power: 191 kW (260 HP)
Advantage
Description Spec Sheet
Description

ISUZU FVR 4×2 12 CBM Twin-Pump Vacuum Suction Tanker Truck

The ISUZU FVR 4×2 vacuum suction tanker is equipped with a 12,000-liter Q235B carbon steel tank and two WEILONG rotary vane vacuum pumps operating in parallel. Its combined theoretical pumping speed of 136 L/s supports sewage collection, septic sludge removal, manure slurry handling and liquid waste transportation. The truck provides both hydraulic tank tipping with rear gravity discharge and side positive-pressure discharge.

Twin WEILONG Vacuum Pump Configuration

Two WEILONG 50QZXDH-68/7000 oil-lubricated rotary vane pumps are connected in parallel and driven by the gearbox-mounted PTO. Each pump has a theoretical pumping speed of 68 L/s, producing a combined rated figure of 136 L/s (489.6 m³/h). The specified vacuum degree is at least 93%, with an ultimate working absolute pressure of 7,000 Pa. Independent oil tanks, forced circulating lubrication and air cooling support the operation of each pump.

12 CBM Reinforced Vacuum Tank

The horizontal cylindrical tank has an effective working volume of 12,000 liters and is manufactured from Q235B carbon steel, with a 5 mm shell and 6 mm front and rear heads. Internal anti-surge baffles reinforced with angle steel help control liquid movement during transportation. The tank is designed for negative-pressure operation with the twin-pump system and includes a vacuum pressure gauge, automatic overflow prevention valve, inspection opening and top safety handrail.

Hydraulic Tipping and Rear Gravity Discharge

A rear-hinged hydraulic tipping mechanism raises the tank body to an approximate discharge position, allowing collected sludge to flow through the large DN450 rear outlet. A heavy-duty hydraulic cylinder operates the tipping system, while the rear door uses a quick-opening clamp-locking arrangement and rubber sealing gasket. This discharge method is suited to thick sludge, manure and slurry containing solid particles that may be difficult to transfer through smaller pipelines.

Side Positive-Pressure Discharge System

For thinner sewage and low-concentration slurry, the truck supports positive-pressure discharge without tipping the tank. The four-way changeover valve switches the twin pumps from vacuum suction to pressure-blowing mode, directing material through a DN150 side-mounted full-bore ball valve. The specified valve is PN16-rated, but actual operating pressure must remain within the approved limits of the tank, pump circuit and pipeline assembly.

ISUZU FVR Chassis and 6HK1-TC Engine

The truck is built on an ISUZU FVR 4×2 left-hand-drive chassis with a 5,050 mm wheelbase and a three-seat GIGA FVR wide flat-floor cab. Its 7.79 L ISUZU 6HK1-TC inline-six diesel engine produces 191 kW (260 hp) and 760 N·m of torque, paired with an ISUZU MLD-6Q six-speed manual transmission. A gearbox-mounted side PTO transfers engine power through a transmission shaft to drive both vacuum pumps simultaneously.

DN100 Suction Pipeline and Pump Protection

The main suction line uses DN100 thick-wall seamless steel pipe, with two pump inlet branches connected to a common suction pipeline. The system includes a large-flow four-way valve, vacuum check valves, vacuum buffer tank, combined oil-gas separator and exhaust silencer. A DN100 reinforced steel-wire rubber suction hose connects to the main inlet, while the separate DN150 side outlet and DN450 rear outlet accommodate different discharge requirements.

Heavy-Duty Configuration for Sewage Collection

The vehicle has a stated GVW of 16,000 kg, curb weight of 10,500 kg and rated payload of 5,500 kg, with a 6-ton front axle and 10-ton rear axle. Its 10.00R20 18PR tires, reinforced steel frame and rear anti-collision protection support routine sewage collection and transportation work. An optional 15 CBM tank configuration is listed with a 5,560 mm wheelbase, subject to chassis compatibility and axle-load verification.

Spec Sheet

Vacuum System Parameters

ItemDetails
Type12 m³ twin-pump vacuum suction tanker with rear hydraulic tank tipping and side positive-pressure discharge
Tank Capacity12,000 L (12 m³ effective working volume)
Pump Type / Model2 × WEILONG 50QZXDH-68/7000 single-stage oil-lubricated rotary vane vacuum pumps, operating in parallel
Vacuum Degree / AirflowVacuum degree: ≥93%; ultimate working absolute pressure: 7,000 Pa; combined theoretical pumping speed: 136 L/s (489.6 m³/h); maximum suction lift: 7 m
Drive ModeISUZU gearbox-mounted side PTO with transmission shaft drive; both pumps operate simultaneously
Tank Material / ThicknessQ235B carbon steel; cylindrical shell: 5 mm; front and rear heads: 6 mm; optional SUS304 stainless steel
Internal StructureHorizontal cylindrical tank with internal anti-surge baffles reinforced with angle steel; sandblasted interior with anti-corrosion primer and sewage-resistant topcoat; vacuum pressure gauge, automatic overflow prevention valve, round manhole cover and perimeter safety handrail
Boom
Suction HoseDN100 (4-inch) reinforced steel-wire rubber hose; DN100 main suction port with female quick camlock coupling
Discharge MethodRear hydraulic tank tipping and gravity discharge through DN450 quick-clamp outlet; auxiliary positive-pressure discharge through side DN150 PN16 ball valve using both vacuum pumps

Chassis Parameters

ItemDetails
Chassis Brand/ModelISUZU FVR
Drive Type4×2, left-hand drive
Engine Model / PowerISUZU 6HK1-TC, 7.79 L inline 6-cylinder turbocharged and intercooled diesel engine, 191 kW (260 hp) at 2,400 rpm; maximum torque: 760 N·m at 1,450 rpm
Emission StandardEuro III
Gearbox / GearsISUZU MLD-6Q, 6-speed manual transmission, 6 forward gears + 1 reverse
Wheelbase5,050 mm
Wheel Track (Front/Rear)2,060 / 1,850 mm
GVW16,000 kg
Curb Weight10,500 kg
Tire Size10.00R20 18PR reinforced steel-wire tube tires; optional 295/80R22.5 tubeless tires
CabISUZU GIGA FVR single-row wide flat-floor cab, 3 seats, left-hand drive, with factory-integrated air conditioning, power windows, electrically adjustable rearview mirrors, suspended driver's seat and central door locking

Send your message to us

Related Products
12,500L Vacuum Tanker Truck
12,500L Vacuum Tanker Truck
Aug .15.2026
Foton Auman Planet 42 12.5m³ vacuum truck for sew...
12m³ Sanitation Vacuum Vehicle
12m³ Sanitation Vacuum Vehicle
Aug .07.2026
Foton Auman D 42 12m³ vacuum truck designed for s...
JAC 12000L sludge
JAC 12000L sludge
Nov .15.2025
Vacuum truck with 12 m³ tank and dual rotary vane ...
GIGA 12000L sewer vacuum
GIGA 12000L sewer vacuum
Nov .15.2025
Vacuum truck with 12,000 L tank capacity and dual ...